Change coolant freelander 1 v6
Good morning every body, afterchanging belt and waterpump and thermosthat I try to fill up the system with coolant. I took off the cap of the expansion tank but after 3 l it stopt going in the system and I still have 5l to go. is there a bolt or must I take of an hose or do an other trick?:bowdown:
|
Hello Christoffel and :welcome:
There may be differences between your V6 and that fitted to the 75/ZT but club member Arctic has a Freelander so hold on tight and he will, I'm sure, soon have the answer for you. Simon |
Quote:
You will need to start the engine and top up has the coolant starts to go round the engine, make sure you have the heater on high a fully open, pour in slowly while the car is ticking over, and keep your eye on the level once you reach minimum let the car run a little more, add the cap run up to temp then turn car off for half hour, top up to Maximum line. https://www.freelanderspecialist.com...elander-fluids |
thank for the info
Thanks for the info. On the net and you tube I only found cars wit radiators with a cap. I had already the idea to start the engine but wes afraid too overhead the engine.
Many thanks, Christoffel:} |
All times are GMT. The time now is 00:45. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd