odd bit
Ok i have a fairly constant supply of odd bits
(e.g) the bits you loose when carring out other jobs Scrivets for wheel arches self tappers odd fixings etc I am willing to help anyone with the above IF AVAILABLE at the time of asking please don't ask for doors bonnets or anything that is of real value |
If you can help, I'm looking for the following bits?
engine undertray fixings (screws & chassis fasteners) front scuttle(? at base of windscreen) fixings also the pipe clips for the breather hoses on top of the engine, similar to quickfit push in plumbing connectors, both sizes. Car is KV6 2.5 auto. Stewart |
Hi,
I could do with a few of the clips that secure the plenum cover, some of mine are a bit ragged where they have been levered up with something sharp... Thanks Mark PS - am happy to pay! |
Quote:
That would be the RED push part? scuttle panel fasteners i have |
Quote:
How many do you NEED as above post will Req a couple. F.O.C p.m your Address |
Unlikely request, but I'm looking for a length of the semi rigid small fuel pipe which feeds the FBH. I need about four or five feet, to enable me to get from the pump at the rear, to a small tank I'm looking to add in the boot area for red diesel.
|
Guys 'n' gals... please note that the OP is doing this FOC. :bowdown::D:D
But please, also be aware that although he is not charging for the bits that he can provide, it would only be fair to point out that postage and courier charges of the parts are costing him. So if he asks for carriage costs, so long as they are reasonable, it is perfectly acceptable on this forum.:D This applies to all, except when collected in person :D |
yes though I have seen them in black too
Stewart |
do you have any clips to secure undertray many thanks
|
Quote:
|
All times are GMT. The time now is 21:02. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd