tool for replacing timing belts mg zt 190
Hello
I'm looking for a tool to replace the timing belt on the engine of the MG ZT (KV6) 190. Where you can buy such a tool? Does he even exist? Regards Denis |
Plenty available online, got mine off Ebay. :D
You will also need the 1/2 moons to suit the 190 cams, I modified my 2.0 KV6 ones to suit, simply a case of knocking the pins out and refitting them on the other side. |
Quote:
The tool for changing the timing belt on the engine kv6 2.0 and 2.5 (177) I have. I need attachments for the front camshaft gears kv6 (190) and the key for holding the rear gears of camshafts kv6 (190). Regards Denis |
Quote:
Brian :D |
Quote:
I understood. And what should I do with the key for the rear gears of the timing chain? There is a key with two rings and they can not be deployed. Regards Denis |
I have to swap the tool horseshoes on the engine or drill new holes in the tool horseshoes and rearrange the pins?
I do not really want to spoil the tool horseshoes for the 2.0 v6 engine Regards Denis |
Maybe sell the case with the tool for the MG ZT 190?
Regards Denis |
Quote:
http://www.ap-tech.co.uk/products/details/27835.html |
Quote:
Where to find the key for MG ZT190? In the link to the photo of the key https://youtu.be/sNESaObnKDw Regards Denis |
That tool is the same for all KV6 (except 825 & Kia models).
If you have that tool with the other 2.0 & 2.5 front tools and horseshoes then it will fit the 190. |
All times are GMT. The time now is 16:57. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd