The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   Technical Help Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=11)
-   -   Emergency boot release - Saloon (https://www.the75andztclub.co.uk/forum/showthread.php?t=306238)

Maxfly 8th July 2020 14:37

Emergency boot release - Saloon
 
Right, pretty sure I’m just being dense.
Checked out the rattle in my boot when it opened and shut to find the emergency release lever was separated from the surround. Fished it out and thought it would likely just clip into the surround but I can’t seen how they would go together, the lever part is too long to sit in between the locating lugs on the surround. How should they secure in place, am I missing any parts or just missing the obvious?! The lever does look to have broken lugs around it but even then I can’t see where it would go.

https://www.the75andztclub.co.uk/for...5d8d0cff4d.jpg

macafee2 8th July 2020 17:19

I have no real idea, does the bit with the cable sit behind the boot lining and the other bit sit in front?

macafee2

Chunky2778 8th July 2020 20:29

Quote:

Originally Posted by Maxfly (Post 2823701)
Right, pretty sure I’m just being dense.
Checked out the rattle in my boot when it opened and shut to find the emergency release lever was separated from the surround. Fished it out and thought it would likely just clip into the surround but I can’t seen how they would go together, the lever part is too long to sit in between the locating lugs on the surround. How should they secure in place, am I missing any parts or just missing the obvious?! The lever does look to have broken lugs around it but even then I can’t see where it would go.

https://www.the75andztclub.co.uk/for...5d8d0cff4d.jpg

I've a saloon I can have a look tomorrow, looking at your pic though would the handle part not clip into a recess in the boot maybe? Then the outer trim clips on over that once the handle part is in place?

Maxfly 8th July 2020 21:07

Quote:

I have no real idea, does the bit with the cable sit behind the boot lining and the other bit sit in front?

macafee2
I think that makes the most sense, but pretty sure something’s missing to enable this??





Quote:

Originally Posted by Chunky2778 (Post 2823770)
I've a saloon I can have a look tomorrow, looking at your pic though would the handle part not clip into a recess in the boot maybe? Then the outer trim clips on over that once the handle part is in place?

If you could that be great ta! That does make sense but I could see anywhere it would clips onto, I get the feeling there may be a 3rd part that goes between these to bits?!?
The outer part was always sitting loose in the boot lid trim so I now think there should be something or the inside it clips into to be secure and the lever can then in turn clip onto that?!?

Jdwoodhou 9th July 2020 11:29

2 Attachment(s)
Better images of the emergency release this time. There are only two pieces; the bezel and the cable with a tabbed end that clicks into place from outside.


https://www.the75andztclub.co.uk/for...1&d=1594294029

https://www.the75andztclub.co.uk/for...1&d=1594294029

Maxfly 9th July 2020 11:33

Thanks for that, I think I have the wrong outer piece. Looking at yours the corners of the aperture are more rounded whereas mine are more squared. That could explain why I can’t get the lever part to mate with it!?! I can’t see a way of physically getting the two parts to clip together as the lugs on the back of the outer bezel are in the way.

COLVERT 9th July 2020 12:17

Excuse me folks. Where actually in the boot can this release lever be found ???
I only seem to have the remote release to the right of my feet or the ignition key to open the boot.

Chunky2778 9th July 2020 12:24

Quote:

Originally Posted by COLVERT (Post 2823869)
Excuse me folks. Where actually in the boot can this release lever be found ???
I only seem to have the remote release to the right of my feet or the ignition key to open the boot.

If you have a key in the boot you may not have the release? Mines a mk2 with no boot lock and that has a release in the offside bottom corner of the boot lid.

Jdwoodhou 9th July 2020 12:38

1 Attachment(s)
Sorry, there are 3 parts!

The cable plus inner and outer bezels. The outer one has the larger hole; the inner one goes behind the trim.

https://www.the75andztclub.co.uk/for...1&d=1594298105

Maxfly 9th July 2020 16:49

Quote:

Originally Posted by Jdwoodhou (Post 2823878)
Sorry, there are 3 parts!

The cable plus inner and outer bezels. The outer one has the larger hole; the inner one goes behind the trim.

https://www.the75andztclub.co.uk/for...1&d=1594298105

Great stuff, thank you! Looks like I need to source that other part. :}


All times are GMT. The time now is 08:27.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd