Blocked plenum.
Ok, so this morning Debs diesel wouldn’t start. Just checked the plenum to find it was well and truly flooded.
Couldn’t get the rod down the tube to drain it, upon removing the tube I found d a Bl00dy grommet fitted perfectly inside the drain tube! What’s the chances eh? https://uploads.tapatalk-cdn.com/201...0238da8860.jpg https://uploads.tapatalk-cdn.com/201...cd7a4aac07.jpg M |
Where did it come from? What were the chances of that happening?
|
looks like the one out the front bulkhead near the wiper motor area
|
Spy hole mod cover?:shrug:
|
It wasn’t a left over part of Devil car getting sits revenge was it?😱
|
Do you need an ECM bud?
|
Quote:
Cheers Bri, I’ll drop you a p’m |
Wasn’t my fault this time - makes a change I normally get blame 🤪
Sent from my iPhone using Tapatalk |
I blame Debs for not spotting that grommet :devil:
Brian :D |
First time I had flooded carpets was due to one of the windscreen clips perfectly blocking the lower drain. Second time was when I pushed through the spyhole mod bung and did not recover it in time. Constant problems due to pine needles where I have to park my car blocking the drain tubes.
Problem now resolved, Plenum drain tubes under servo and lower drain now removed, 2 big holes right through to the ground, spotlessly clean, you could put a hose pipe in there and it would all drain out. No more blockages ever again! |
All times are GMT. The time now is 06:25. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd