water logged diesel ECU repair?
I just went with a friend of mine who is a professional mechanic to look at a customer's ZT diesel auto.
It's a late model one with the different headlamps. The rev counter was going nuts and there was a weird buzzing noise so I suggested checking the plenum chamber. It was full of water. There is a power relay in the same box as the diesel ECU which submerged and the bottom inch of the ECU was wet. We opened up the engine ECU and there are signs of water damage on the bottom inch of the circuit board. He will have a go at cleaning it up gently with a tooth brush and some solvent tomorrow, and replace the power relay. If it doesn't work then who do we contact for a repair? It's a nice car with good bodywork and interior and only about 50k miles on it , big wheels etc so worth saving. |
Marinabrian is your saviour in this scenario mate
Regards Chris |
Do you really need to ask who?? I think the man is on a break from here at the minute :D:D.
Neil |
Send a message to trikey believe he is passing on messages to brian
|
Quote:
|
Get in contact with Brian, as said. He will sort it out no problem. :}
|
Quote:
|
Try placing it in a domestic oven on the extreme lowest setting, leave the door open.
Overnight would be best. Ken. |
Quote:
Water and a little detergent followed by a hot rinse then a good blow with a hairdryer then a warm radiator for 24 hrs. I used to wash TV boards this way and as they run off the mains and had 25kv EHT with no issues |
If you didn't manage to sort this Phil, I have NNN500340 in stock ;)
Brian :D |
All times are GMT. The time now is 06:16. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd