Still got a clonk, do these bushes look like they do the job ?
 

Had the 2 suspension arm bushes replaced recently and initially it was better, but now the clonk/movement is back on power take up, do these bushes look like they are doing the job? if so the problem is elsewhere[IMG][IMG]https://farm2.staticflickr.com/1727/...7c6179699f.jpgbush1 by Mangizmo Brean, on Flickr[/IMG][IMG]https://farm2.staticflickr.com/1804/...453f15ce40.jpgbush2 by Mangizmo Brean, on Flickr[/IMG]

I fitted these
 

[IMG]https://farm5.staticflickr.com/4652/...6cc20d031d.jpgbushes by Mangizmo Brean, on Flickr[/IMG]

But are they just NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD- and I should have fitted these ??
[IMG]https://farm5.staticflickr.com/4760/...b37e838184.jpgbush real by Mangizmo Brean, on Flickr[/IMG]

They are knackered already Vaughn, fit the decent ones this time ;)

Brian :D

They have done under 1000 Miles !!!!!!!!, have you got a link to the good uns' please GRRRRRRRRRRRR!!!!!!!!

LINK LINK

They are good value at under £18 delivered for quality ones. I usually get first line ones that cost about £27 at local motorfactors.

Sent from my Redmi 4A using Tapatalk

Buy some poly bushes like powerflex and never worry about the bushes again!!
Cost a little bit more but well worth it!!

Polybushes are too hard, little or no give radially.

Well said that man.:bowdown::bowdown: 3yrs so far with mine & no issues

Regards

Paul

Have you also checked your lower engine mount to see it that is ok or needs changing?