Bonnet cable route
Hi all,
Hopefully a quick question, I've searched but can't find a definitive answer. Reassembling the headlights etc and wanted to check if the bonnet cables run in front (captive towards the bumper) or behind (free towards the engine) with regard to the top retaining bolt for the headlight. I hope I've explained that well enough! |
Quote:
Might be a bit tricky but you could try slipping a short bit of plastic tubing over the exposed screw thread (or around both cables at the appropriate spot), that will protect the cable outers. |
Perfect! Thanks so much, that's exactly the info I was looking for. The car is finally all back together.:bowdown:
|
[
Quote:
Hi Rob. A little late now for you but i found these photos https://i.imgur.com/6IbfVLFl.jpg1 https://i.imgur.com/xNDrtxkl.jpg2 https://i.imgur.com/siBwcL4l.jpg3 https://i.imgur.com/M2vubfkl.jpg4 |
All times are GMT. The time now is 13:36. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd