Scuttle Panel Clips - EYC101470PMA
 

Hello guys,
I thought I'd better post this in the General section, as I know these are mind-numbingly expensive at the moment (£2.00 from most XPart dealers or thereabouts, and £2.40ish on eBay).

I've managed to get them down to 99p per clip individually (or a full set of 7 is £5.99, so 86p per clip).

Just thought I'd let everyone know, as I know a lot of you will probably have them missing or badly discoloured with age.

They're these clips:
http://cdn.shopify.com/s/files/1/022...lips_large.JPG

Order here: EYC101470PMA - Scuttle Clip - Genuine MG Rover

Happy clipping. :D

Do you supply them in Walnut LOL!!

Damn - you're telling me 2 weeks too late.:duh:

Previously we've paid a small fortune for these - but working with XPart we've managed to get a discount on a large quantity.
We'll certainly have enough for the next year or two with how many we bought to get the price down!

Thank you Mat, just ordered a set! :)

Me as well along with a slam panel bolt kit. Oh yes and re-usable air filter. Should be all ready for the Pod on Sunday :).

Thanks guys, two sets ordered

Thanks for all the orders guys - it's been manic today with these! All going out tomorrow, to arrive with you shortly after.

Thanks again. :)

I suppose you had better add a set to my list.

Damn you taking all my money, even if it is less than Rimmers have pulled my trousers down for in the past ;)

Thanks Mat, just ordered a set. ;)

Thanks Bob. These are all to be posted today - a rather large box just landed. :D

Mat,

Can you bring me a full set to the next Stretton Sunday meet in March and I settle up then.

Thanks,

Geoff

Hello Geoff, I'll bring some with me. :)

Mat

Thanks, full set ordered.

Thank you. :)

On a related note, you guys know how to keep us busy - these are today's scuttle clip orders:

http://i282.photobucket.com/albums/k...t.jpg~original

Time for a sit in a dark room! :D

Just ordered a set, thanks Mat.

Ordered ours yesterday, all confirmed, and on their way.

Thank you most kindly,

As you know,ever the same.

Roy & Rosebud.(Old Man and frail Old Lady).

Take good care of each other.:

Thank you very much. :)

on a related note Mat, could you get a deal on these perhaps? - DWE100002PMA (the scuttle panel itself!)

I second that i could do with a new scuttle and clips if price is right :D
oh and these, 4 off for the central finishers.
http://www.rimmerbros.co.uk/Item--i-DYB100121

I can try, chaps - they're still quite expensive though, even at our rates.
Rimmers are showing as £56.33, we'd probably be able to go down to around £49 (but I'd have to clarify).

May I have a set please.

Many Thanks.
Julien

scuttle clips
 

Do you have any left please if so could I order a full set please.
Geoff

Packet of 7 - on its way to Central Portugal, to replace 4 badly faded panel clips,
Thanks...:}

Plenty left guys - I have 1,000 here at the moment.
Here's the link for anyone wanting a set:
EYC101470PMA Scuttle Clips

Oh dear, ordered mine with a bottom engine mount on the group buy ... a lot cheaper now.

1x Rover 75 / MG ZT Scuttle Clips - EYC101470 - Genuine MG - 7x Clips (Full Set) for £11.49 each

We used to source them from SAIC MG and they cost us a fortune - thankfully XPart are a lot better on bulk pricing.
I've dropped you an offer in PM, anyway. ;)

Plenty of these left chaps! Just had another box dropped off. :)

http://i282.photobucket.com/albums/k...u.jpg~original

Scuttle Clips - From 86p/ea

Thanks Mat - top man.

Thanks for working on that.

I'm interested in some of these as I lost one and another is really badly discoloured.

Don't suppose you know how to get hold of one of those annoying "scrivet" things too do you?

I'm working on the scrivets, but they'll be a few weeks from now (depending on availability).

Mat

Still got plenty left - grab 'em while they're hot. :)

We've just received another batch of these for the same fantastic price - so now have plenty for all. :)

I have just got around to fitting this set of scuttle clips.
Much better, as the old ones had faded and were looking a bit sad. ;)

http://i1159.photobucket.com/albums/...pswgf5ccwv.jpg

http://i1159.photobucket.com/albums/...ps6thxzisn.jpg

Thanks Matt. :}

Glad to see them fitted - they look great! :D
We still have plenty left for anyone after a set - click below:
75/ZT Scuttle Trim Clips

They do look the business, saw them in the flesh on Sunday!

But tell me, do you have these aswell? Part No.: DYB100121? They are the plugs for the Roof Bar attachment screws.

Thanks.

Hello Bill,
I can get hold of them, but to be honest they wouldn't be at a great discount compared to Rimmer Bros.

If there was enough interest I could go in to XPart with a Group Buy or similar, however. :)

I was just wondering as they are another part that goes white... :(

I agree, and they are a worse eyesore than the scuttle clips IMHO.

Nearly every car I have seen could do with a set.
At a good price, they should sell like hot cakes. ;)

When you posted this on Facebook a month ago I did ask you about the scuttle panel. If you had any new ones lying around or if you could get your hands on a brand new one.
It would certainly suit my needs to combine this offer with a brand new scuttle panel.

Great to see we can still get these plastic parts which show wear.
In a bind for bits over here,Ive got good results using somthing like vasaline on these bits on the car which seems to give them a limited new life, but there aint no substitue for new!!!
By the way,thanks DMGR for your prompt service for the parts I ordered here in Australia,good job!!!!(unsolicited plug!!!)

No problem at all - thank you for your order. :)

New batch just in! :)

Order placed for 7 this morning, look forward to receive them

Received with thanks - they're on the way. :)

Hi DMGRS, any news on the possibily of getting your hands on a new scuttle panel??

We're working on that, but none of our contracted couriers will carry them due to their length. TNT is our next target, and with them on board we'd have no problem shifting them. :)

Hi Matt

Not directly related to the thread title but as you were recently here...
Can you get the following part, DYB10012? Need one but I'd take two.

All Car Parts Fast want £10.98 for two posted.
Rimmers want £12.48.

For those who don't recognise the part number, that's two grommets, the size of a penny. Mental.

I really begrudge the extortionate postage lol.

Cheers

James

Hi James, can you check the part number? Can't find that one here. :)

Hi Matt

Direct Rimmers link here...

The part is a replacement for a discontinued item that went under the reference DYB100120 - number '6' in the part list here...

It's the roof rack blanks/grommets.

Ah, you'd missed the last '1' off the part number. :D
Got it, shall have a look and drop you a PM. :)

Not wanna promote going offtopic, but there have been a few more topics about this part. Perhaps it would be interesting to others if DMGRS has more of them? Perhaps a new topic to promote them?

Edit; thanks for your answer to my previous question. My fingers are very much crossed!

If there was a lot of interest I could approach XPart for a group deal. :)