Antiroll bar
Just a size question. Does anyone have the size of the antiroll bar bolts that secure the two brackets to the D rubber to the chassis please. Changing both sides, and don’t want to end up with any problems if the bolts are not reusable. Thanks in anticipation.
|
Front or rear David?
If front, I can help you because I've had mine off. ;) Simon |
rear M8 x 20 (pt no FS108207L)
Front m8 x 25 ( pt no ..FS108256) or use the 25mm's on both ;) Chris |
https://www.lrdirect.com/fs108256-screw
Remember you require a flanged bolt so the head size is 10mm as you may struggle to fit a normal m8 bolt with 13mm head |
Quote:
|
Quote:
|
Yes the rears are flanged bolts and the part number chris gave you for the rears entered into a google search will find flanged bolts
|
You could also use cap head screws m8x20 on the rear with washers:}
|
All times are GMT. The time now is 07:55. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd