are these the correct FBH gaskets
 

Are both or one of these the correct gasket set for our FBH?
https://www.ebay.co.uk/itm/GENUINE-WEBASTO-THERMO-TOP-C-E-Z-HEATER-GASKET-SET-SERVICE-KIT-9000861A/231167849420?_trkparms=aid%3D555018%26algo%3DPL.SI M%26ao%3D1%26asc%3D61138%26meid%3D77c0fc4c0df846a7 bfbac093dab437d8%26pid%3D100005%26rk%3D3%26rkt%3D1 2%26mehot%3Dpf%26sd%3D113712819323%26itm%3D2311678 49420%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p 2047675.c100005.m1851

and or

https://www.ebay.co.uk/itm/WEBASTO-THERMO-TOP-E-C-DIESEL-WATER-HEATER-BURNER-SERVICE-GASKETS-EBERSPACHER/113712819323

thank you
macafee2

The £19 version looks like what I got from Bowers when I did my refurb. Have a look on their site for confirmation. If you havnt done refurb before there are 3 seals you reuse that don't come with the kit.

thanks. Hopefully just a flow plug change.

macafee2

Found this Ian if its any good to you.

https://pbautoelectrics.co.uk/wp-con...7_optimize.pdf

I have used the £9.99 one previously and worked as it should, pretty sure I bought it as it was cheaper than the other one you have listed as I just re used the screws.