The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   Technical Help Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=11)
-   -   Evap Purge fault (https://www.the75andztclub.co.uk/forum/showthread.php?t=300047)

Yanbanshee 18th October 2019 08:31

Evap Purge fault
 
Anyone familiar with the P0443 fault on a V8 ? Apparently the Evap emission control purge valve. Does anyone have a likely location for this fault. (apparently quite common)

Yorkshire GOC 18th October 2019 09:45

I had this fault as a comforting yellow MIL on my IPK for many years - resets and clears with T4/OBD but returned in a few miles -20 miles being the longest - 5/6 miles the shortest distance.

Swopped out the purge vale - no joy
Swopped out the hose to the charcoal cannister - no joy
Swopped out the charcoal cannister - no joy
Checked electrics to purge valve - no joy

Suggested other problems - a break in the vacuum system caused by a faulty fuel cap - swopped out fuel cap - no joy

A micro leak in the exhaust hose - again impairing the vacuum - never got round to checking this.

It was suggested it could have been an ECM fault - but i have remapped my car to 200bhp with a new KMAPS ECM with the programmed factory limiter software removed - no joy However the yellow light has gone out - but an OBD tool still shows the fault. For your MOT to avoid a fail i suggest prior to your test you use an OBD tool to clear the code - it should last long enough for you to pass the test.:shrug:


All times are GMT. The time now is 13:18.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd