New rear subframe fail safe washers for sale
 

Needed some new washers for my own 75 so manufactured tooling to make them and did a couple of extra sets while at it. They are unpainted so would want a coat to protect them.

£15 posted

https://uploads.tapatalk-cdn.com/202...3407e90f4c.jpg

PM sent.

Dave

PM sent.


Cheers, Emiel

Just for comparison, here’s the difference from one removed and new. The material of the old one was very thin, not much more than 1mm in places! The new ones are 3mm as the originals were.

https://uploads.tapatalk-cdn.com/202...2fb3bd2b64.jpg

New rear subframe fail safe washers for sale
 

Pm sent to you

PM sent regarding washers.

Tommy :-)

Replied :)

Excellent Work
 

Hi Reece.
I( must say you have made an excellent job of those,:bowdown: and the price is really good too, what more can anyone ask for, those whom intend to keep these cars going far into the future will need a set of these eventually, you may be bust :D

Thank you! Fairly straightforward with the press tooling to knock out, it would be cheaper to make if the process was automated but would mean a very large batch would be needed so not cost effective considering demand.
You can be sure every one is made with love and care :D

Tried to pm you but your inbox is full, are these still available?