How does front top suspension go back together
Hi nephew stripped this out and now I https://imgur.com/gallery/RRumJKwhttps://imgur.com/gallery/RRumJKwhave to refit, any info ?
Thanks |
there are posts on here if you search in the google at the top of the page.if not then go onto rimmer bros website and look at the front suspension struts assembly drawings. all will be obvious . :D
|
Thanks had a look at rimmers and couldn’t work it out till I found a part that we had misplaced
|
top mount and bearing plus coil spring. grease up the bearing if poss and be careful when reassembling as the bearing must go in flush up against the rubber mount holder whilst releasing the spring. if not it will need to come off again. or separate as one of mine did ,after fitting, that was the type with the plastic bearing race that i fitted new ... :eek: good luck.
|
just add as well that make sure the coil end is located in its correct end stop position,otherwise you will have issues with droplink threads and the coil may spin or break eventually....
|
All times are GMT. The time now is 12:44. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd