Front wishbone choice?
 

. .

I need to replace mine too - the current Wishbones/Bushes were purchased from DMGRS and need replaced after 2 years - about 2.5 years to date but the o/s BallJoint has been knocking for a while - BallJoint and Rear Bush are Goosed.


My Car is not in daily use at the moment - (when i'm able) I hope to fit better quality parts this time round ;) ......



Paul.

you could take a look on here.

https://www.mister-auto.co.uk/suspen...hp-2002-2005/#

https://m.autodoc.co.uk/car-parts/st...17785-2-0-cdti

You want the trw arms from here £100 the pair and are perfect :}

I am currently looking at these ones, £92.90 for the pair with a 2 year warranty.

If most of them only last 2 years what's the point in paying expensive for them?

Wishbones

I have TRW brakes (good brakes) all round so I am looking at these too, thanks.

TRW were the original manfacturers, I fitted a pair of these to the wife's car last year, also from Autodoc in Germany, and they're spot on.

Under no circumstances would I pay Rimmer prices for "original equipment" Made in PRC, and well you have the road test from Paul as to the other ones ;)

Brian :D

I think a member recently fitted these
https://www.ebay.co.uk/itm/DELPHI-Suspension-Arm-Track-Control-Arm-for-ROVER-75-TC1261-Mister-Auto/191695637167

https://www.ebay.co.uk/itm/DELPHI-Suspension-Arm-Track-Control-Arm-for-ROVER-75-TC1260-Mister-Auto/311448485765

macafee2

A good quality arm and delivery was fairly quick also, add some extra grease into the drop links the last set i had which where the cheapest you could get from ebay lasted 12 months, I have done the same again bought the cheapest from eBay and packed them full with grease will see how long I get out of these ones.

By any chance do you have a duff N/S arm hanging around? I want one to do some fiddling on a little project. Happy to pay P&C
Ooops it's the O/S arm I'm after (with the little recess for the Xenon sensor arm clip)