The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)

- The 75 & ZT Gallery (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=56)

- - DanBMXes zt 160 (https://www.the75andztclub.co.uk/forum/showthread.php?t=122691)

Fantastic achievement bud, great to see the boundaries of the K series being pushed.

Well done Dan,great achievement :bowdown:

Fantastic result! 250bhp:D

The 331nm converts to 244 lb ft's.

I need to know this as my automatic gearbox will only handle a maximum of 258 lb ft.

Sadly I can't drive a manual anymore, hence having to pay attention to different tolerances.

Quote:

Originally Posted by danbmx_69 (Post 1354739)

heres another mod done and i think this might be of intrest to alot of people if you have ever had a set of mist washer jets you know what they are like for screen coverage now i have wanted to fit a set for a while but the only set i knew of were citroen mist jet but these are not heated so no good if you have heated washer jets so i looked all though the citroen range and couldnt not find a heated set, so i turned my attention to ford and found out that the focus mark 3 had them fitted, so a quick e bay search and i found a set, looked at the photo and then went on rimmer brothers and the ZT ones are pritty much the same shape so i knew these would fit the cut out of the bonnet maby evan with some fileing if needed

[/B]

I have these fitted to my 75 took the opportunity to have the tank and filter etc, cleaned. Very pleased with the result. :}