Wheel tyre sizes
Hi
I'm thinking of changing to larger wheels could somebody advise me if they will be better or detrimental to mpg. Original size is: 215 55 16 Replacement is: 225 45 18 Odometer readins are as stated: 16" wheels at 50 mph 18" wheels read 51.27 mph 16" wheels at 100 mph 18" wheels read 102.55 mph Overall diameter is 16.8 mm larger on the 18" which equates to +2.55% Can't get my head around if that's better for mpg or not:shrug: Thanks Col |
Quote:
The Mrs is watching re-runs of the British bake off on TV, therefore I was feeling a bit bored so here goes.;) It should in theory be better with 18" wheels (circumference approx. 2072 mm) Calculated by the following: 18" x 25.4 mm = 457.2 mm (255/100)x45 = 101.25 mm 101.25 x 2 = 202.5 mm 457.2 + 202.5 = 659.7 mm the diameter of wheel and tyre. pi x diameter = circumference 3.141 x 659.7 = 2072.12mm Repeat for 16" wheel with different values. Every 1rpm of the driveshaft will take about the car about 53 mm further along the road compared to 1 rpm with the 16" wheel (circumference approx. 2019mm) To calculate distance travelled in an hours driving at a constant driveshaft rotation of 1000rpm. 1000 x 60 min = 60,000 revs per hour 60,000 rph x 53mm = 3,180,000 mm 3,180,000 divide 1000 = 3,180 metres or 3.18 km 3.18 km divided by 1.6 = 1.99 miles further with 18" wheels. To calculate velocity in mph: 60,000 driveshaft rph x 2.072m circumference = 124,320 meters per hour travelled. 124,320 divide by 1600 = 77.7 mph So at a constant 77.7 mph you would in theory travel 1.99 miles further for the same number of engine revolutions, about 2.56% more efficient. However this is all probably negated if you open the window for 20 minutes! Make of it what you will. :cool: |
However it is similar to driving in a slightly higher gear and the engine will be working a little bit harder. I do not reckon you will notice any difference in mpg.
What you will notice is that the ride is harder. In my opinion I would stay on the 16" wheels |
The same amount of work is done in moving around, whether the car runs on 15" wheels or 18" wheels. The amount of work done controls the fuel consumption.
TC |
Quote:
If you do an experiment at a constant speed. Once in the correct gear and once in a gear that is miles too high for the speed you are doing then you will find the former is giving the best consumption. Or another way to look at it is if you are trying to accelerate at low speed in too high a gear how you have to floor the accelerator to get the car moving |
W=MV is not an equation I'm familiar with. Do you have a web reference for it?
TC |
Work = Mass x Velocity ?
|
Quote:
But it doesn't. Anyway, whatever version of physics you wish to apply, altering the wheel rim size has no effect on mpg. TC |
Quote:
Agreed. Seem to recall this from "A" physics. However this is a simplistic formula used when you are pushing/pulling an inanimate object. Would not apply without modification to an engine with a non linear power curve operating through a gearbox with rations. |
Quote:
Agreed which is what I said in my first post. In your first post you said it was 2.56% more efficient which I thought you meant that there would be a fuel saving. |
All times are GMT. The time now is 11:55. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd