The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   Technical Help Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=11)
-   -   Mystery bolt hole (https://www.the75andztclub.co.uk/forum/showthread.php?t=300430)

Blink 31st October 2019 19:41

Mystery bolt hole
 
Directly in front & above the charcoal canister (the pipe connector end) there's a bolt hole in the chassis box section - what goes in it? I may or may not have removed something from it - either way, I've forgotten. :duh:

For those who have never seen it, the charcoal canister is on the RH side of the car (underneath), just to the right of the spare wheel well. Three pipes connect to the front of it. The hole is just in front of them and above. Petrol cars only (I think!).

macafee2 31st October 2019 19:51

I have no idea but does Rimmers web site parts list show anything?

macafee2

marinabrian 31st October 2019 20:07

For mounting the fuel oil cooler on diesel models ;)

Brian :D

Arctic 1st November 2019 00:29

Quote:

Originally Posted by marinabrian (Post 2772412)
For mounting the fuel oil cooler on diesel models ;)

Brian :D


https://i.imgur.com/Oe9088pl.jpg :D

Blink 1st November 2019 09:38

Quote:

Originally Posted by macafee2 (Post 2772410)
I have no idea but does Rimmers web site parts list show anything?

macafee2

Not really, the parts themselves just levitate in mid air, like this - and the only diagram of the relevant underfloor area is this one. I think the #3 is the correct 'box section' but you can't see the bolt holes properly anyway.


Quote:

Originally Posted by marinabrian (Post 2772412)
For mounting the fuel oil cooler on diesel models ;)

Brian :D

Ah, that'll be it - the cooler must be slightly longer than the charcoal canister, which has one bolt at the rear end and a hook at the front (the hook goes into a rectangular hole in the box section).

https://www.the75andztclub.co.uk/for...c099d7f10d.jpg

Quote:

Originally Posted by Arctic (Post 2772455)

The bolt visible on the rear end of the cooler in this pic must use the same hole as the bolt on the rear end of the canister. Then the bolt on the front end of the cooler (#8 here) must go into the mystery hole.

So I leave it empty then. Thanks chaps.:clap:


All times are GMT. The time now is 13:23.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd