The 75 and ZT Owners Club Forums - Removing Harmony Radio

Hi all.

I'm in the process of updating...... ;)....... the 19 year old radio cassette unit in my 2001 diesel tourer.

This is for a Harmony unit. Other types may well be slightly (or substantially) different.

For those that haven't already changed their radio or newbies that might want to know here's how she came out:

Pop out the cover under the top fascia molding.
https://live.staticflickr.com/65535/...9eb3c7_w_d.jpg

Then the two No2 pozi headed screws tucked up underneath
https://live.staticflickr.com/65535/...7cdd83_w_d.jpg

And pull it gently towards the back of the car.
https://live.staticflickr.com/65535/...15795c_w_d.jpg

I now took off the covers for the switches (if you have them - I haven't) and heater controls. Probably not strictly necessary but I find it makes life easier.
https://live.staticflickr.com/65535/...a6cb09_w_d.jpg

https://live.staticflickr.com/65535/...01e370_w_d.jpg

Now two more No2 pozi screws that actually hold the radio in:

If you have a small magnet it helps to stop the screws dropping down into spaces where fingers can't go :duh:
https://live.staticflickr.com/65535/...c3bd4e_w_d.jpg

Passenger side:
https://live.staticflickr.com/65535/...b4f0bf_w_d.jpg

Driver's side
https://live.staticflickr.com/65535/...2c533c_w_d.jpg

On mine it was then lifting the unit up a bit and easing her out.

And voila :D
https://live.staticflickr.com/65535/...efe3cd_w_d.jpg

The electrical connecting block has to be unclipped - it's not just a push fit. Usefully there's a little picture on the connector showing you what to do.
https://live.staticflickr.com/65535/...4d39d2_w_d.jpg

Pull off the ariel lead and you're ready to put the new one in.

Hope that helps.

Andy.