The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   The 75 and ZT Owners Club General Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=9)
-   -   Replacement fan assembly rover 75 Diesel (https://www.the75andztclub.co.uk/forum/showthread.php?t=295818)

janker 16th May 2019 21:19
Replacement fan assembly rover 75 Diesel
 
Hi everybody
Im after advice if this would fit my car as the fan is not working on my Rover 75 2002 M47 Engine even after replacing the fan motor brushes.
The Rad looks in better condition than mine,would it fit my car.

https://www.ebay.co.uk/itm/Diesel-Ra...wAAOSwaURc2U1I

many thanks for reading julian

T-Cut 16th May 2019 22:58
Yes, the later 2-speed system is P'n'P to the earlier 3-speed one. And while you're on eBay, you should also buy an uprated slow speed resistor. The one in the photo is the under-powered OEM one which, if not already blown will fail sooner or later.

TC

janker 17th May 2019 06:57
Quote:
Originally Posted by T-Cut (Post 2734260)
Yes, the later 2-speed system is P'n'P to the earlier 3-speed one. And while you're on eBay, you should also buy an uprated slow speed resistor. The one in the photo is the under-powered OEM one which, if not already blown will fail sooner or later.

TC
Many thanks TC appreciated.


All times are GMT. The time now is 22:32.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd