The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   Technical Help Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=11)
-   -   The 'Interchangeable Parts Thread' (https://www.the75andztclub.co.uk/forum/showthread.php?t=134757)

Mdan 16th June 2013 22:41

brake pads and anti vibration springs for 325 discs are same as bmw 330d

rover775 1st July 2013 11:09

xenon headlamp
 
Hi does anybody know if the front sensor for the xenon headlamp that fits on the front suspension is the same unit thats on the E46..?

Dashiel 1st July 2013 14:04

You need to read the part number off the side of the sensor.
If i recall it is the same as the mk1 mini and another bmw car. (But you need to check this as one car used same sensor front and back and the other didn't.)

versus 1st July 2013 19:27

Actuator-secondary throttle traction control part number SWY100030 (208 gbp on rimmers and 120 gbp on ebay) are identical with this part from BMW series 5 E39 2,8l.

rover775 3rd July 2013 23:58

Quote:

Originally Posted by Dashiel (Post 1350279)
You need to read the part number off the side of the sensor.
If i recall it is the same as the mk1 mini and another bmw car. (But you need to check this as one car used same sensor front and back and the other didn't.)

part no YMQ110720 AND BMW 1-093 697

lexey5900 5th July 2013 19:09

plastic coolant bleed screw
 
part from BMW £2.65 part number 17111712788.

I posted the part number in case someone reads this thread in the future and needs this part as another member was quoted about £152 for the same part but you would have to read his thread for the name of the stockist

i remembered that the BMW part was the same as mine broke on me when i had a E34 520

hope this helps members save money:shrug::shrug:

phil7000 22nd July 2013 14:21

In tank petrol fuel filter
 
While investigating fitting the orange clip to the later type in tank petrol fuel filter in my 75 I discovered some info that may be of use. The same type plastic filter/sender assembly was used on the Mini Cooper 2002-2006 (BMW R50/R53) under part numbers 16146757196 also made by Vaico No. V20-0717.
The paper filter comes as a kit with o rings and seals. below is a link to a site which gives an excellent instruction on replacing the paper filter, although it's a mini you will notice the similarity.
http://www.billswebspace.com/MiniR50...erDIYGuide.htm

MG Tom 17th August 2013 06:53

Brilliant find, thanks!!

nomzamo999 6th September 2013 01:12

Does anybody know if the plastic oil filter head on the CDTi is interchangeable with a BMW equivalent please?
I've tried a number of web searches but can't find an equivalent part number.
The Rover part number is LPX 100690.
Thanks

EnEnGee 23rd October 2013 19:55

Quote:

Originally Posted by nomzamo999 (Post 1409141)
Does anybody know if the plastic oil filter head on the CDTi is interchangeable with a BMW equivalent please?
I've tried a number of web searches but can't find an equivalent part number.
The Rover part number is LPX 100690.
Thanks

I would be very surprised if it is not as the engine is BMW and came as a crated unit to fit. You could probably pick one up at the breakers for pennies.


All times are GMT. The time now is 16:29.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd