Jacking Pad Glue.
I want to stick a jacking pad on the car any recommendations on what to use. Cheers. Rev. |
I’ve used Gorilla glue and that’s worked ok.
|
Jacking pad glue.
I just used two self tappers, drill through about 12 mm from edge on each side to miss the internal bracketing.
|
Tiger seal will hold them on forever
|
The two that I have are in the boot !
Pete |
Is it wise to stick them on? They attract rust, especially the OSR one.
|
I am about to have my sill welded up and was wondering about having a welded on metal pad on the car and a soft pad on the jack instead. Any opinions on this?
|
The jacking pads have a central 'cup' receiver for a similar sized 'pip' on the emergency jack. This is a safety measure to stop them sliding sideways under load. Whatever mods are made to the sills it ought to safely accomodate the jack you carry in the car.
TC |
Goop!
I have now tried a product called Goop Automotive glue and sealant. Rev. |
Can I ask why people are sticking them on ? :} Is it due to rusting sills ?
Mine just push in and twist and are still fine after 18 years :shrug: I shouldn't have said that , should I ; they will probably fall off now :eek::getmecoat: |
All times are GMT. The time now is 11:15. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd