kv6 under tray
Hi all question is there a diagram were the fixing screws should be as I came to take mine off this afternoon and it was fixed with self tappers [12) nuts and bolts (5) numerous cable ties and bits of twisted wire on seeing this I ordered a new set of fixings but I want to be sure were they go many thanks Rod
|
I just had mine off today. Mine was only missing two, with one of them secured with a wire tie.
4 in the front, 2 at the front of the suspension mounts, 2 at the rear of the suspension mounts, and 2 at the tips of the tails at the back. |
Thanks very much for that Rich I can see were they go at the front but the previous owner has put that many fixings in I was not sure which were the right ones when my new screws and clips. arrive I will follow what you say many thanks Rod
|
Quote:
|
thanks very much for that BLINK looking at the link it seems i might need a replacement under tray has i seem to have a lot more holes than the one showed thanks again Rod
|
There are new Polish ones on ebay https://www.ebay.co.uk/itm/ROVER-75-...oAAOSwsotamCC3 a local member bought a new undertray recently, possibly same and had to re-adjust some of the holes.
Hampson Composites http://www.hampson-composites.co.uk/pages/home.htm OEM, had some themselves, don't know if they've all gone but I'd contact them first before sourcing elsewhere. Note the Polish site claims to have sold 230+ of these, perhaps too small a volume for Hampson to be interested. Regards |
Do you need one at all?
|
Quote:
I've emailed Hampson. PS. There's another one here from a UK supplier - https://www.ebay.co.uk/itm/322858706219 - it appears to be the same as the Polish one. "ROVE 25 FLORIMEX" is pressed into it. (25, not 75 :shrug:) |
Quote:
|
|
All times are GMT. The time now is 00:43. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd