Machine polishing - it's hard work!
I was hoping to have my car fully detailed for this weekends POL and Ragley Hall meet but I'm nowhere near finishing it. It has taken a lot out of me! I've spent approximately 20+ hours cleaning since Tuesday and I'm shattered. It will simply just have to wait until next week. I've lost all motivation. It's not particularly fun...
So far, I've done: - cleaned all wheels, inc using tardis and iron x and finished with a wheel wax. - 2 bucket method wash - car dried - tardis applied and wiped and rinsed off - car dried - iron x applied and rinsed off - 2 bucket method wash - car clayed - 2 bucket method wash - car dried - machine polished bonnet, both front wings - Polished front bumper by hand - machine polished rear boot lid - machine polished roof - waxed all the polished areas. - cleaned interior, not as thorough as I would of liked The machine polishing is very time consuming as I had to go with a cutting compound then once that was done, had to use a finishing polish then was it. Each panel took an average of about two hours. Very hard work. I've now packed everything as I couldn't stand to do any more and went for a lie down. I still have all the doors to do and the rear quarters. :( I will do it bit by bit next week. A panel a day I think. And I used to enjoy detailing.....:shrug::o |
You have my sympathies. Machine polishing can be hard work, particularly if you have to do a lot of paint correction. The first time I did my '75, one of my neighbours commented: "That's cheating". It certainly didn't feel like cheating!!
On the plus side, future sessions should be a lot easier now you've done the main correction, and you'll have a car to be proud of. :} Oh, and don't forget the photos. :D Cliff |
I've just had to go for a lie down just thinking about going through all that:D
|
Very true Teflon. My car has never had paint correction done before so it is needed. So many swirls it's ridiculous. The bits that have been polished have come out ok. Still lot of imperfections but a lot lot better. I'm no expert at it. Only done machine polishing once before. But, I know what I'm doing and with practise can only get better and hopefully a bit quicker! My car will be about 40% shiny this weekend!
|
Ive just been polishing mine over 2 days ready for POL but have just foumd out the Kent Group is no longer attending. Gutted!! But on a plus side the car looks stunning now :)
|
Two days is good going. I need at least a week!
|
The car is now 85% done. Just for the rear passenger side quarter to do and rear bumper. Spent 10 hours yesterday doing the doors. I am now officially fooked. :mad:
|
I wish I had your patience, dedication and energy Rav :shrug::bowdown:.
|
I don't know if dedication is the right work, Steve. I never want to do it again! :o
|
Finally done. Soooooooo tired now!
|
All times are GMT. The time now is 18:41. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd