Xenons
Hello all ...can someone tell me if Xenon headlights can be pulled apart and fixed my up and down allen key adjuster doesn't work and there is something rattling about inside.:icon_cry:
|
Ive fixed some, you have to cut a hole in the bottom.
As for adjuster you need to try and get one of a damaged/scrapped light as they dont sell them. I expoxy the adjuster wheels to the metal shaft so mine wont ever come off. |
Quote:
|
that's whats happened to mine the wheel on the back just turns,but I will have to look inside to see whats rattling I will try the epoxy on the wheel spline this weekend cheers
|
If its the top mount you have to cut a hole in the bottom to clip it back on or the fource applied could pull the reflector off its bolted mount.
Tried and done that, since that expensive mistake I always cut a hole in the bottom and plastic weld the cut out back on. |
Just re read your post have you tried a 10mm spanner on the rear instead of the Allen key part as the teeth maybe worn where the 2 meet.
|
Quote:
I noticed one of mine had been wound out so far it had come off the cam and needed re-seating. It was the one in top right on drivers as you stand in front of the car. Dont know which that adjusts horizontal or vertical beam. But never come off again. |
Quote:
|
Quote:
|
I am seriously thinking of seeing if someone will swap for a set of Projectors
|
All times are GMT. The time now is 14:26. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd