Part number
 

Could anyone tell me the part numbers of the pre-project-drive C pillar sections (those with the Rover badge) for the saloon, please? And does anyone have a hint where I maybe could find them?

Hi Andreas, just buy the badge, might be simpler:cool:
https://www.ebay.co.uk/p/652344227?iid=301695815815

... hum ... isn`t there any difference between the c-pillar bases? I considered that the pre-project-drive base has some kind of an impressed skip for the badge.

Ddg100260mmm
ddg100270mmm

You are correct.

The badges have two short plastic dowels, which locate into holes in the plastic C pillar trim.

The holes are in a dished, or recessed, part of the plastic, the same shape as the badges, into which they are located, such that the badge itself, sits proud of the pillar trim.

i.e. the recess is roughly half of the depth of the badge.

Mike

Ron, you are right. But I´m a little bit pedantic. :D

John, Mike, this helps. Many thanks!

The rear of the pillar
https://i.imgur.com/sjRksAal.jpg

These are the stick on badges below, as opposed to the Dowel ones above, which as already been stated sit in a recess.

https://the75andztclub.co.uk/forum/s...d.php?t=305183