The drivers button has snapped off but i could try getting in too the window switch and giving that a clean

cheers

Here you go mate, have a look through this thread :)

http://www.the75andztclub.co.uk/foru...witch+cleaning

Thanks for the tip just found that guide so looks like i could get my mirrors working but im afraid my drivers switch is actually physically broken snapped off

is it possible to just replace the plastic cover switch?

cheers again

if you dismantle it, it all comes to bits....you could probably get a normal switch and use the buttons from it..........

Around £30 to £40 buys the standard pack which you could strip down.

http://cgi.ebay.co.uk/Rover-75-MG-ZT...A1%7C294%3A200

http://cgi.ebay.co.uk/ROVER-75-MG-ZT...A1%7C294%3A200

Thanks for all your help everyone ill let you know how i get on:D

Be quick

http://cgi.ebay.co.uk/ROVER-75-4-way...3A4%7C294%3A50

Thanks for the pic. I understand these switches are VERY hard to find. Would the power folds close and open upon ignition being turned on and on? this would do without the need of that switch?

Al

The circuitry as is used, uses manual control by the switches.

Eurorover (IIRC) made a few kits to enable automatic ign on ign off operation. There is no factory option for this though. All done manually via the elusive switch :)
HTH