https://rimmerbros.com/ItemList--MG-...94?src=UK1020W

Hope this works lol

2 of us seemed not to have found it, you could have provided a link as you seeded to found it. The link has now been provided by another member.

macafee2

just a word of warning, the cheap one does have this note SN-To 2D249453 but I have no idea of the difference.

macafee2

i bought 2 of these and changed mine. now have a spare ! not a bad job just take it slowly and methodicaly. there is a howto on here somewhere by a member rich i believe. his only problem was changing the rubber boot over . this has to be done. you can either cut them and rejoin them or use 2 x plastic conduit pieces cut longways afer being well lubed up to pull them on and off. the latter method is preferable i found. search for the howto and good luck. .... ;)

Do you know the significance of the part number?

Is it one column fits all.

Thanks

From what I remember from 5 years ago, the £25 one was LHD and the RHD was £300+.
The 2 differences were the rubber boot at the bottom which you can swap over from the old one. The other difference was the mark on the top of the column which should line up with the mark on the steering wheel. The LHD one will be a couple or 3 splines out. No problem, but you need to be aware and align the steering wheel yourself.
I did mine and been perfect since, although my son in law now owns the car.

How To Remove and Refit Steering Column

Sorry, cannot post links, but did an advanced search titled as above and found the original instructions, but sadly photos missing.
It was posted by rich17865.

You are welcome.

https://www.the75andztclub.co.uk/for...d.php?t=196928

Here’s the How to Link

Well, at under £40 delivered, I've ordered one.
It will either fit or it won't lol.