|
||
|
18th January 2018, 23:01 | #1 |
I really should get out more.......
ZT CDTi 135, ZT260SE Join Date: Feb 2011
Location: Dundee
Posts: 2,877
Thanks: 10
Thanked 331 Times in 213 Posts
|
Android Head unit fitting - A serious disappointment
So I just test fitted an android head unit, and to my amazement, I had the sticking out at the bottom by a MILE issue, which looked totally RUBBISH.
No problem I thought, must be some cables preventing it at the back.. I check this, ER NEGATIVE... OK, so what the hell is going on? I investigate further, and to my surprise the unit is HARD up against the cut out for the stereo in the center console. I ground the tabs to PERFECTION using the dimensions of the width of the original Rover as a guide, and the tabs fitted bang against the flats where the locating screws, so the unit was in as far as it could go. Even further investigation revealed, that the bottom of the unit where the problem is, was actually hard up against the centre console, meaning no amount of clips or anything else will improve the situation. The bottom of the unit is TOO ***king thick front to back. I just about manage to capture some pictures of the tiny bit of metal sticking out either side, and its hard butted against the sides of the hole. Pressing the bottom firmly, you can see the centre console flex. I am deeply unhappy about this, as I spent a massive amount of time doing it all like a factory finish, even sourcing nice BMW connectors for the SWC so it was all like a proper plug and play loom. Are some of the units different dimensions to others? As far as I see it, there is no way around this, but the sticking out at the bottom, and the large gaps either side make me think that it is just not fit for purpose. Before I lose my damn mind with frustration, can anyone tell me if this is essentially as good as it gets, because if so, I'd rather have the Kenwood back in tbh. Have I just wasted my time, effort and money? If the dash is cut, then the unit is effectively swinging in the hole right? there will be no support for the thing!! Not acceptable. I really need something to actually go right at the moment, things suck, I am ill, the car needs load of jobs, nothing is going right and this is the last straw. Here are the pics:- 1) Just WTF? 2) Unit hard up against the center console cut out 3) 4) 5) Pro job on the tabs, to original Hiline specification dimensions wise:- To add insult to injury, look at the mm perfect fitting on an E46..... Last edited by T16; 18th January 2018 at 23:39.. |
19th January 2018, 05:42 | #2 | |
Gets stuck in
Rover 75 2.5 Manual Starlight Silver Join Date: Oct 2013
Location: Utrecht
Posts: 825
Thanks: 173
Thanked 254 Times in 199 Posts
|
Just a thought: when re-fitting the climate control unit, use some washers between the unit and the center console on the top. That will make the top of the climate control unit protrude a bit more thus coming flush with the radio.
Not perfect but less annoying and hardly visible for people not familiar with the car HTH
__________________
Greetz, Sjonnie Rover 75 2.5 Manual MK2 MY 05 Starlight Silver - Miss March 2022 / Miss May 2023 MG F 1.8i MK2 MY 00 in Anthracite MG ZT-T 190+ MK2 MY 05 Xpower Grey (sold) - Mr Cover page 2021 Dearly missed: ꝉ ꝉ MG ZT 190+ MK2 MY 04 in Black Olive #8/8 R.I.P. - Miss February 2016 Quote:
|
|
19th January 2018, 06:00 | #3 |
This is my second home
Rover 75 Tourer/ MG ZT-T 400 Join Date: May 2012
Location: Lhanbryde
Posts: 3,279
Thanks: 2,627
Thanked 1,523 Times in 869 Posts
|
That’s just how it is, my one is the same so just try not to look at it
|
19th January 2018, 07:08 | #4 |
This is my second home
No more Rover Join Date: Apr 2009
Location: Barnsley, South Yorkshire.
Posts: 5,881
Thanks: 1,625
Thanked 1,308 Times in 998 Posts
|
My Naval 2 sticks out at the bottom. When fitting it a couple of years ago I took it out (no funnies please) three or four times and finally gave up.
Personally I tend to keep my eyes on the road and it bothers me not now. Ken. |
19th January 2018, 08:26 | #5 |
This is my second home
1979 Capri 1.6L, 1982 Capri 1.6L, 2016 Dacia Stepway Join Date: Jun 2009
Location: Dorset
Posts: 8,596
Thanks: 3,496
Thanked 3,397 Times in 2,218 Posts
|
I was lead to believe these units were OEM factory fit, but I have been told by a few members now that they don't exactly fit. Like you, they have the unit sticking out at the bottom.
I like you purchased a second-hand E46 style unit, I didn't even get as far as fully installing the unit as it was faulty, so I cant give you any pointers to the installation. In the end I purchased a universal android unit along with the Rover 75 fascia adapter surround, it actually looks factory fit. You are still faced with a snug fit, but the unit does fit in perfectly once the wires are tucked away neatly. |
19th January 2018, 09:05 | #6 | |
This is my second home
No more Rover Join Date: Apr 2009
Location: Barnsley, South Yorkshire.
Posts: 5,881
Thanks: 1,625
Thanked 1,308 Times in 998 Posts
|
Quote:
Ken. |
|
19th January 2018, 09:06 | #7 |
Posted a thing or two
Mazda 6 Join Date: Dec 2013
Location: Wigan
Posts: 1,384
Thanks: 266
Thanked 398 Times in 287 Posts
|
Has it got the spring clips at the bottom front corners? a lot don't seem to and they make a surprisingly big difference!
I'd still pull it out and put it in the bin myself because this will probably be the first in a series of disappointments. Edit: I've just had a look and one of the ones in my pile of **** still has the clips, I'll happily put them in the post if yours doesn't have them Last edited by mystabe; 19th January 2018 at 09:12.. |
19th January 2018, 09:42 | #8 |
I really should get out more.......
ZT CDTi 135, ZT260SE Join Date: Feb 2011
Location: Dundee
Posts: 2,877
Thanks: 10
Thanked 331 Times in 213 Posts
|
No,
It does not have the spring clips at the bottom, and I had been trying to source them. However, they would make absolutely zero difference. The issue is that the shape of the hole that every other standard radio fits in just does not work for these Chinese Android units. BMW widescreen, Highline, and all the other standard radios fit without issue. If you look at the pics, you can see there is nowhere for the clips to make a difference. I am not willing to irreversibly hack my centre console in the hope that some spring clips will sit at exactly the right place to keep the bottom of the unit stable when being pressed. When the hole is widened or the small little "tabs" of material at the bottom of the hole are removed, there is nothing for a headunit to butt up against to keep it stable, it would be swinging effectively from the top two screws. This is not satisfactory. I see people have offered advice like "bend your top lugs to make it better" but this is a bodge, not a fitment. Bending the top lugs has the effect of pushing the top of the unit out, making the angle at the bottom less, but in reality its more of an optical illusion than a fix. The only way around it will be for me to investigate the dimensional differences between this Android unit and the original Single DIN MG Rover fitment. I strongly suspect there is nothing that can be sensibly done other than removing metal and plastic from the back of the unit at the sides to match the two small areas left in the centre console hole. This is a rubbish solution also. I think I will either sell this unit or seek a refund, and just get a cheap, modern single DIN Kenwood with a USB port on the front. Ive not got the time, energy, and patience to NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD- around with nonsense like this. These units do not fit, they are not fit for purpose, BEWARE. |
19th January 2018, 09:44 | #9 | |
I really should get out more.......
ZT CDTi 135, ZT260SE Join Date: Feb 2011
Location: Dundee
Posts: 2,877
Thanks: 10
Thanked 331 Times in 213 Posts
|
Quote:
Im willing to bet this is a seriously unlikely prospect! Just about had enough really. |
|
19th January 2018, 10:04 | #10 |
Posted a thing or two
Mazda 6 Join Date: Dec 2013
Location: Wigan
Posts: 1,384
Thanks: 266
Thanked 398 Times in 287 Posts
|
To be honest I never really had that big a problem with this, the Navall 3 was by far the worst for it but the clips mostly sorted it out, it still stuck out a little but you could live with it.
The WinCE and Navall 2 just fitted in as you would hope they would I have to say I don't miss the constant messing around with them one little bit tbh! Your idea about buying a proper car stereo is the option I'd go for, life is so much less annoying The problem isn't actually with how far it goes in, more that they swing so the bottom of the facia sticks out - which is why the clips actually work to a fair degree. I tried everything including a bracket at the back but nothing really worked 100%, as soon as you hit the 1st decent pothole out popped the bottom edge again Last edited by mystabe; 19th January 2018 at 10:17.. |
|
|