Totally Lost on Radioguy D99+ Installation

GagHalfrunt · 21st April 2013, 12:33

Hi

I purchased Graham's D99+ setup as advertised on here. Note that I know absolutely nothing about car's electrics but even allowing for this I'm totally stuck.

My car currently has a Harmony connected via a Connects2 adaptor to a Sony CD Changer. I believe this is the OEM setup for this car which is an early ZT190+.

Please see pictures of what's on my car - any ideas anyone? There is nothing remotely like in the huge box of cables. I'm guessing I have a BMW-style connector whereas in the box they are all ISO-looking things.

Dave

GagHalfrunt · 21st April 2013, 12:34

Just to add I know the RCA phono plugs are from the Sony changer.

No idea what the thing is wrapped up in foam.

Chilljohn · 21st April 2013, 13:09

looks like you need a convertor lead from bmw to standard iso ?

http://www.ebay.co.uk/itm/BMW-WIRING...item3cc9302f03
(edit cheaper one found)
maybe a
http://www.ebay.co.uk/itm/PC5-27-ISO...item2568065b26

too

Radioguy · 21st April 2013, 13:14

Yes , We Usually Provide with that as well as the SWC Adapter.
Graham has another model of Car now so no reason to keep those
Unless he Did not remove them from his car before selling it .

Cheers

Sean

We have them

GagHalfrunt · 21st April 2013, 13:42

Thanks both. Do you sell them Sean or shall I just get one off eBay?

Will it work with the steering wheel controls or do I need another lead for that? I have the hard wired controls as opposed to the IR ones.

GagHalfrunt · 21st April 2013, 14:11

In case it helps, here are photos with all the other leads in the box.

As you can see, quite a lot of them! I'm normally pretty good with "working things out" on PCs and Home/Professional Audio but must admit was a bit freaked when I saw that lot!

Graham has also put in an ODB2 reader and a Freeview receiver (I think) in the box.

GagHalfrunt · 21st April 2013, 14:12

I have far too many photos it seems!

GagHalfrunt · 21st April 2013, 14:13

Last two!

Dave

Chilljohn · 21st April 2013, 14:16

yup 1st link in my 1st post then connect to the relevant adaptor for your radio by look of it

cant be much more help than that as never had one , but 1st port of call looks like changing the bmw plug to standard iso

Radioguy · 21st April 2013, 17:58

Quote:

Originally Posted by Chilljohn

yup 1st link in my 1st post then connect to the relevant adaptor for your radio by look of it

cant be much more help than that as never had one , but 1st port of call looks like changing the bmw plug to standard iso

Hi Chill

I have a Step by step photo Set that will help you Sort it , Please PM Me your Email Or Email me at [email protected]

This is your GPS Antenna

This is your DVB-T Receiver Antenna

This is your IPOD Connector

The thing With the 2 on here is the SWC Adapter

this is the PATCH Lead to the Steering wheel Control Adapter

21st April 2013, 12:34	#2
GagHalfrunt Gets stuck in MG ZT190+ Solar Red Commission No: 396 Join Date: Feb 2008 Location: Very North Cotswolds Posts: 702 Thanks: 17 Thanked 4 Times in 4 Posts	Just to add I know the RCA phono plugs are from the Sony changer. No idea what the thing is wrapped up in foam. __________________ Dave D. Vell, He'z Juzt Ziz Guy Y'Know?

21st April 2013, 13:09	#3
Chilljohn Posted a thing or two MG HS PHEV Join Date: Nov 2006 Location: Worksop Posts: 1,576 Thanks: 58 Thanked 80 Times in 75 Posts	looks like you need a convertor lead from bmw to standard iso ? http://www.ebay.co.uk/itm/BMW-WIRING...item3cc9302f03 (edit cheaper one found) maybe a http://www.ebay.co.uk/itm/PC5-27-ISO...item2568065b26 too __________________ John Free enable of digital speedo readout on message centre (takes 2 mins) Free Vis motor testing, via obd port courtesy of my delphi so no need to take anything apart, along with free code scan including abs and airbag message me for details Last edited by Chilljohn; 21st April 2013 at 13:16..

21st April 2013, 13:42	#5
GagHalfrunt Gets stuck in MG ZT190+ Solar Red Commission No: 396 Join Date: Feb 2008 Location: Very North Cotswolds Posts: 702 Thanks: 17 Thanked 4 Times in 4 Posts	Thanks both. Do you sell them Sean or shall I just get one off eBay? Will it work with the steering wheel controls or do I need another lead for that? I have the hard wired controls as opposed to the IR ones. __________________ Dave D. Vell, He'z Juzt Ziz Guy Y'Know? Last edited by GagHalfrunt; 21st April 2013 at 14:07..

21st April 2013, 14:16	#9
Chilljohn Posted a thing or two MG HS PHEV Join Date: Nov 2006 Location: Worksop Posts: 1,576 Thanks: 58 Thanked 80 Times in 75 Posts	yup 1st link in my 1st post then connect to the relevant adaptor for your radio by look of it cant be much more help than that as never had one , but 1st port of call looks like changing the bmw plug to standard iso __________________ John Free enable of digital speedo readout on message centre (takes 2 mins) Free Vis motor testing, via obd port courtesy of my delphi so no need to take anything apart, along with free code scan including abs and airbag message me for details

21st April 2013, 13:14	#4
Radioguy Banned None Join Date: Feb 2010 Location: Here on the Forum Posts: 5,352 Thanks: 632 Thanked 822 Times in 573 Posts	Yes , We Usually Provide with that as well as the SWC Adapter. Graham has another model of Car now so no reason to keep those Unless he Did not remove them from his car before selling it . Cheers Sean We have them