75/MG double din logos share yours here.

picky747 · 28th March 2010, 16:48

If you have a favorite logo post it here and share with other users.
Right click on the picture and chose "save image as".If you post any
use 800x480 for correct sizing on the unit.Here are a few I've done in
Paint Shop Pro.

This is for the original units that do not have the TMC onboard,the new units work slightly differently.

Ok then,the logo change.For this you will need the picture you wish to use as your logo on an sd card in the left hand card slot or on a memory stick in the usb port.Put a dvd in the slot and press setup on the remote,scroll down to CHANGE LOGO and highlight ON,press ok and exit menu.Press the mode button until you get to the SDcard or USB and press on the screen the picture icon and select the picture you want for the logo,if you only have pictures on your SD card/USB they will display automatically so just press pause when the one you want is displayed.When the picture is displayed press ST/PROG (under the down arrow) on the remote and the screen will show SAVING LOGO.Thats it ,logo changed.

28th March 2010, 16:48	#1
picky747 Gets stuck in ROVER Join Date: Sep 2008 Location: Vera Posts: 746 Thanks: 56 Thanked 111 Times in 85 Posts	75/MG double din logos share yours here. If you have a favorite logo post it here and share with other users. Right click on the picture and chose "save image as".If you post any use 800x480 for correct sizing on the unit.Here are a few I've done in Paint Shop Pro. This is for the original units that do not have the TMC onboard,the new units work slightly differently. Ok then,the logo change.For this you will need the picture you wish to use as your logo on an sd card in the left hand card slot or on a memory stick in the usb port.Put a dvd in the slot and press setup on the remote,scroll down to CHANGE LOGO and highlight ON,press ok and exit menu.Press the mode button until you get to the SDcard or USB and press on the screen the picture icon and select the picture you want for the logo,if you only have pictures on your SD card/USB they will display automatically so just press pause when the one you want is displayed.When the picture is displayed press ST/PROG (under the down arrow) on the remote and the screen will show SAVING LOGO.Thats it ,logo changed. Last edited by picky747; 19th October 2010 at 08:02..