|
||
|
1st September 2019, 14:55 | #33 |
Loves to post
Rover 75 Saloon & MGZT 190 Join Date: Jun 2012
Location: Leek
Posts: 390
Thanks: 333
Thanked 57 Times in 39 Posts
|
Hi All
I purchased one of these units and fitted it and works fine im just trying get the rear camera working,I have connected it all up as in Dallas picture below except mine is a slightly different model. But at the moment i have power to the rear camera when i select reverse and camera lights up ok,I have connected the red trigger wire at the back of the unit to the Brown wire labelled BACK on the Din unit and thought this would work when i select reverse but sadly no,Now im wondering if i need to connect the other wire labelled BRAKE coming from the small din plug adjoining the RCA cable to the two wires ive already connected to trigger the camera on screen,It says on the attached diagram it needs +12 volts,So was wondering if it would be possible to connect this wire to try. I have enclosed the small wiring diagrams from the manual as Dallas has been helping me but is difficult to explain without seeing these.
__________________
This vehicle was the 53,401st 75 to run off the production line, out of 112,381 This vehicle was the 2,551st 75 CDT Club to be made out of 3,403 This vehicle was the 5,192nd 75 in White Gold Metallic (code: GMN) to be made out of 12,251 White Gold Metallic 75s My New Addition MGZT 190 Trophy Blue 2001 Petrol. Last edited by janker; 2nd September 2019 at 08:42.. |
|
|